Mark Swanson photo

Mark Swanson

Mark Swanson is a Sr. Account Executive at JBC with over 20 years of experience in die-cutting, fabricating, and laminating. When not at work, Mark enjoys spending time with his wife and two daughters, running, and repairing or restoring just about anything with a motor.

Posts:

6/28/2018

Thermal Pads and Thermal Films for Heat Dissipation

arrow-right

Die cut thermal pads and thermal films dissipate heat away from hot spots in LED lighting, consumer electronics, motors, and other applications. From material selection to precision die cutting, JBC Technologies can provide the thermal interface materials (TIMs) you need.

Thermal Management
die cut materials for thermal management
6/20/2018

Graphite Gaskets for Thermal Management

arrow-right

Graphite gaskets are die cut from thermal interface materials (TIMs) with strong thermal conductivity. They resist thermal shock and dissipate heat evenly and rapidly across printed circuit boards (PCBs). Flexible graphite sheets support die cutting, bonding to foil, and the use of PSA adhesives.

Thermal Management Gaskets Die Cutting
Graphite Gaskets for Thermal Management
6/13/2018

Thermal Interface Materials (TIMs): Four Types of Die Cut Products

arrow-right

Thermal interface materials (TIMs) create a thermal path from a heat-generating component to a heat sink, a device that dissipates heat. With die cutting, engineers can choose graphite gaskets, thermal pads and film, thermal tape, and gap fillers. Learn how these die cut products compare.

Thermal Management
die cut graphite heat spreading material
5/23/2018

Large Parts Die Cutting

arrow-right

Large parts die cutting produces bigger, stronger parts that look better, last longer, and take less time to assemble. Examples of these die cut products include car door vapor barriers, hood liners, head liners, heat shielding, point-of-purchase (POP) displays, and large format graphics.

Die Cutting
Large Parts Die Cutting
5/3/2018

Platinum-Cured Silicone Gaskets for Medical Devices

arrow-right

Platinum-cured silicone gaskets are used in medical devices that require ultra-pure, ultra-clean materials. JBC can die cut platinum-cured silicones for medical wearables and wired or wireless devices where a die cut silicone gasket may touch human skin or require repeated sterilization.

Silicones Strategic Sourcing Die Cutting Medical
Platinum-Cured Silicone Gaskets for Medical Devices
4/27/2018

Medical Seals and Gaskets: Die Cut Products for Medical Electronics

arrow-right

Medical seals and gaskets protect medical electronics from a host of hazards that can jeopardize patient health and safety. In this article, part of a series from JBC Technologies, we’ll examine three applications for die cut products in medical electronics.

Silicones Electronics Foam and Elastomers Medical
Medical Seals and Gaskets: Die Cut Products for Medical Electronics