Mark Swanson photo

Mark Swanson

Mark Swanson is a Sr. Account Executive at JBC with over 20 years of experience in die-cutting, fabricating, and laminating. When not at work, Mark enjoys spending time with his wife and two daughters, running, and repairing or restoring just about anything with a motor.

Posts:

12/13/2017

Die Cut EMI Shielding Fabric Tapes

arrow-right

Die cut EMI shielding fabric tapes have a fabric backing and an acrylic conductive adhesive on one or both sides. JBC die cuts 3M metallized cloth tapes.

Material Selection EMI/RFI Shielding and Grounding Electrically Conductive Tapes Adhesive Tapes Pressure Sensitive Adhesives 3M Electronics
Die Cut EMI Shielding Fabric Tapes
12/5/2017

Die Cut EMI Shielding Foil Tapes

arrow-right

Die cut EMI shielding foil tapes have a metal foil backing that controls EMI and provides electrical conductivity. JBC Technologies is a 3M Select Converter.

Material Selection Electrically Conductive Tapes Adhesive Tapes Electrical Insulation EMI/RFI Shielding and Grounding Electronics 3M
Die Cut EMI Shielding Foil Tapes
11/28/2017

Die Cut EMI Shielding Tapes: Types and Applications

arrow-right

Die cut EMI shielding tapes are used in electronic devices and equipment. There are two main types: EMI shielding foil tapes and EMI shielding fabric tapes.

Material Selection Adhesive Tapes Electrically Conductive Tapes EMI/RFI Shielding and Grounding 3M Electronics
Die Cut EMI Shielding Tapes: Types and Applications
11/21/2017

Die Cut EMI Absorbers: Types and Applications

arrow-right

Die cut EMI absorbers are made of thin, flexible materials and used in medical, wireless charging, navigation, avionics, NFC, RFI, and other applications.

Material Selection Strategic Sourcing Elastomeric EMI Shielding Electrical Insulation EMI/RFI Shielding and Grounding 3M Aerospace Electronics
Die Cut EMI Absorbers: Types and Applications
11/1/2017

Parts Presentation and Die Cutting Costs

arrow-right

Parts presentation is one of three major factors that drives die cutting costs. Are your die cut products presented properly when it’s time to install them?

Engineering Product Development General Die Cutting Pull Tabs Kiss-cutting
Parts Presentation and Die Cutting Costs